4G Watch Setup

3 min. readlast update: 10.17.2023

You can download our User Guide here

Before use - DO NOT turn the watch on until the SIM card has been installed correctly. Please ensure the device is fully charged before first use. The watch requires an active mobile SIM with text calls and data.

You can watch the video or follow the steps below:

Download the App

During installation, your phone may ask to trust the App or allow access to the phone's location. Please select trusted and allowed all the time. Download and install the App “Aibeile Plus” by following one of the two options:

undefined

iOS App: https://apps.apple.com/us/app/aibeile-plus/id1470562481

Android : https://play.google.com/store/apps/details?id=com.tgelec.aibeile22&hl=en_AU&gl=US

Installing a SIM Card (only applicable to those that have purchased BYO)

undefined

Step 1

Use the mini screwdriver (included) to remove the SIM cover on the watch. 

Step 2

Insert a suitable 4G SIM card with the gold side facing upwards and the diagonal corner facing the bottom right corner of the watch – see image for details. 

Step 3

Push the SIM card all the way in until it clicks into place. You may need to use a fingernail very carefully or something to push it all the way in.

Step 4

Lock SIM card cover tightly with the screws after the SIM card is installed to ensure waterproofing.

Step 5

Push SIM in slightly until you feel it click to release. 

DO NOT TURN ON THE WATCH UNTIL YOU HAVE SCANNED THE QR CODE INSIDE THE FOLLOWING APP SETUP

You can also follow this tutorial video: 

Register and Connect Device�

Step 1

Open the App, new users will need to register a new account by clicking on the bottom right “Register” button.   

Please note that you will need to select the right area you are located in, for example, if you’re in Europe, you need to choose “Area” as Europe. If you’re in Australia, you need to choose “Area” as “Asia and Oceania”.

You also need to input a correct email address to ensure you can reset your password if needed.

undefined

Step 2

Complete the registration steps.

Step 3

After successful registration, login to the account, select ‘More’ > Device list > Add device, and Click the scan icon to scan the QR code on the GPS watch. 

undefined

Note: The Registration QR code is the 15-digit registration number found on the QR sticker on the box, or in the watch menu “More” - QR code. RegCode is not the IMEI barcode number.

You can also follow this tutorial video:

Using the Watch, Troubleshooting & Tips

undefined

Power on

Hold the power button for 3 seconds to start the watch.

Power off

  • Option 1: Click the watch ‘More’ / ‘Settings’ / ‘off’ / ‘OK’
  • Option 2: APP Settings / ‘Remote Shutdown’

Charging

Here is a list of articles that can help you:

My device is showing “offline” on app

Watch doesn’t power on and/or charge

No SIM card detected (!) on Watch

Set GPS tracker APN settings

Location doesn’t seem accurate?

Watch shows a different time than app

Using the watch overseas

Was this article helpful?