Help CenterAll Seek Pro have been preconfigured and are ready to go out of the box. You will be able to view the current location of your GPS device by logging into the web portal or mobile App. All additional functions can be adjusted via the web portal and limited functions and settings via the apps.
Additional features include geofencing, low battery alarm, over speed alarm, fall detection and SOS alerts and all notifications types.
You can watch this video or follow the steps below:
Getting to know your device
Charging your device
Make sure that the Seek PRO is fully charged before the first use - around 2 to 3 hours of charging. There are two ways to charge your device:
Charging with the charging base
- Place the device on the charging base.
- Connect the USB cable from charging base
The charging base light will glow when charging and turn solid when fully charged.
Wireless Charging
- Place the device on top of the wireless charger pad
Note: The wireless charging pad is not included, must be purchased separately
TIP: When the battery level falls below 20%, it will send a low battery warning message to people on the contact list via text message or APP.
Turning your device on/off
Turning it ON: Pess the CALL button for 1 second - all the LEDs should flash rapidly. The device can also be turned on automatically by charging via magnetic USB cable or put it into the docking station.
Turning it OFF: Pess and hold the both CALL button and the SOS button for 3 seconds - until the LEDs turn off.
Getting a GPS fix
To get an initial fix for the GPS features, use outdoors or near a window so the device can get a fix on the satellites. This could take few minutes according to your environment
Download App
Download NutTAG GPS App and create an account. Click for Android app link here OR iOS app link here. You may also scan one of the following QR codes.
Download the guide here